Entrepreneurs | How-To

HOW TO: Laser Engrave a Wooden Cutting Board

Cutting boards on their own are not so great a gift, however, this little “how-to” guide will lead you to be able to create personal and useful gifts for friends and family this holiday season.

1. Mask it

Masked Cutting Board

Use masking tape to mask the better side (the side with fewer knots and uneven spots) evenly and without overlap. This is to keep the overburn and ash dust off of the un-lasered portions. Keep the tape from overlapping or you may run the risk of having lines through your engraving.

2.  Laser it

Laser Engraved Wood Tray

Make sure everything is level and run it. We ran our cutting boards at a speed of 10 and a power of 35. We wanted our engraving to be nice and dark. If yours doesn’t turn out quite dark enough the first time, remember that you can run the file again so long as you don’t move the cutting board.

3.  Un-tape it

Laser Engraved Cutting Board

Un-taping is the most tedious portion of this process. But taping it up really is worth it. Make sure to get all of the little bits and pieces out of the letters.

If you want to coat it in something after engraving then you can treat it with mineral oil or beeswax every so often. It can be cleaned with granulated salt and a sliced lemon slightly more often. (For more information on this process you can check here.)

Business Growth Guide
For the visual learners, you can go here to watch a video on this process.

We hope you found this how-to helpful! If you’d like more information, contact us today!

5 Comments

  1. James Bergman

    I don’t like the idea of having to pull the tape off after the engraving process. However, it is better to have a good engraving than to be a little frustrated pulling off the masking tape. I know that using a spray bottle to moisten the tape can help a little, but I have only ever done that to get tape off of windows. I don’t know how it works on wood.

  2. admin

    Removing the tape can be a bit tedious! But you can’t have beauty without a little pain, can you?

  3. Emily

    What kind of engraving machine do you have and recommend. While searching to purchase one i started to realize my full size wood slices and boards would not fit in many of the engravers.

    • admin

      Hello Emily,

      We have 40w, 80w and 100w lasers available. The neat thing about our lasers is their open architecture. This patented design opens up so many possibilities and provides users with little to no size or weight restrictions. If you could provide me with the size of your wood pieces, I could send you in a better direction as far as the size of laser that would work best for your application!

      Thanks,
      Kristin

  4. Cody Harmon

    Same question as Emily.. I need some advice for which machines to to compare for mainly cutting boards.

You May Also Like

6 Steps on Choosing The Right Laser Machine For Your Business

6 Steps on Choosing The Right Laser Machine For Your Business

Choosing the perfect CO2 laser engraver can be daunting, with so many options available in the market. But don't worry! At AP Lazer, we're here to help you make an informed decision. Our comprehensive guide on "Choosing The Right Laser Machine," breaks down the...

Laser Engraving Business Ideas for Post-Retirement

Laser Engraving Business Ideas for Post-Retirement

For many people, retirement is the perfect time for doing the things you’ve always wanted to do, like starting a your own business. If you’re a retiree who is looking for an enjoyable and profitable post-retirement venture, a laser engraving business might be perfect...

Bring Big Acrylic Signs to Life with AP Lazer

Bring Big Acrylic Signs to Life with AP Lazer

The sign industry is a booming enterprise. When it comes to creating big acrylic signs, a laser cutting, and engraving machine is a MUST. Sign makers are streamlining their processes even further by using a laser for cutting and engraving thick pieces of acrylic that...

Let’s get started. Choose an option.

Want to Learn More?

AP Lazer has a wealth of resources that we provide to help you, from how to use and maintenance our laser machines, to how you can grow your business with unlimited possibilities.

Request More Info

Get a Price Quote

The cost of laser cutting machines varies based on the model, type, power and capabilites.  Please fill out the form, and a sales rep will be in touch you with a price of a machine perfect for your needs.

Request Pricing

Finance an AP Lazer

We have payment plans to fit your needs. Pre-qualify in minutes. Whether an established business or just starting out, when you finance a laser machine, you open up many business opportunities .

Apply for Financing